Handleiding
Je bekijkt pagina 36 van 68
3636
MALFUNCTIONING AND ERROR CODES
If the induction cooktop (or a cooking zone) turns O unexpectedly, a buzzer (beep) sounds
and an error code is shown on the timer display (typically alternating with one or two digits),
this indicates a technical fault.
1. Write down the error code (letters and numbers).
2. S
witch o the cooktop, disconnect it from the mains
and c
ontact your Authorised
Service Centre.
If an anomaly occurs, the induction cooktop automatically switches to self-protection mode
and an error code is shown on the timer display as per table below:
Error
code
Example What to do
E4 / E5
Induction coil temperature
sensor failure
Please contact your Authorised Service
Centre.
E7 / E8
IGBT temperature sensor failure
Please contact your Authorised Service
Centre.
E2 / E3
Abnormal supply voltage
Please switch On the cooktop only after
it has cooled down completely.
E6 / E9
High temperature of the IGBT
temperature sensor
Please switch On the cooktop only after
it has cooled down completely.
IMPORTANT: DO NOT disconnect the
cooktop from the electrical supply to
allow the cooling fan motor to operate.
The above errors list comes from the evaluation of the common anomalies.
In case of other faults not listed, always refer to the Authorised Service Centre.
IMPORTANT: To avoid risks and damages NEVER disassemble or try to repair the
appliance yourself, always refer to the Authorised Service Centre.
DISPLAY/S OFF OR NOT CORRECTLY OPERATING
If a display or the displays are only partially lit or not lit
,
switch o the cooktop and disconnect
it from the mains
.
Contact your Authorised Service Centre.
Bekijk gratis de handleiding van Delonghi PRO 66 MXL IN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delonghi |
| Model | PRO 66 MXL IN |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5959 MB |
