Handleiding
Je bekijkt pagina 18 van 40
1818
REPLACEMENT OF THE INJECTORS
If the injectors are not supplied they can be
obtained from the
After-Sales Service.
Select the injectors to be replaced according to the
“Table for the choice of the injectors”.
The nozzle diameters, expressed in hundredths of a
millimetre, are marked on the body of each injector.
REPLACEMENT OF THE INJECTORS
OF THE COOKTOP BURNERS
To replace the injectors proceed as follows:
• Remove pan supports and burners from the
cooktop.
• Using a wrench, substitute the nozzle injectors “J”
(gs. 2.5a, 2.5b) with those most suitable for the
kind of gas for which it is to be used.
The burners are conceived in such a way so as not
to require the regulation of the primary air.
ADJUSTING OF THE MINIMUM OF
THE TOP BURNERS
In the minimum position the ame must have a length of
about 4 mm and must remain lit even with a quick turn
from the maximum position to that of minimum.
The ame adjustment is done in the following way:
• Turn on the burner.
• Turn the tap to the MINIMUM position.
• Take o the knob.
• With a thin screwdriver turn the screw “A” until
adjustment is correct (g. 2.5c).
Normally for LPG, tighten up the regulation screw.
CONVERSION TO NATURAL GAS OR TO LPG
J
Fig. 2.5a
Auxiliary,
Semi-rapid and
Rapid
burners
Fig. 2.5b
Double-ring compact
burner
Fig. 2.5c
A
J
Bekijk gratis de handleiding van Delonghi DSRM 905G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delonghi |
| Model | DSRM 905G |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4287 MB |
