Handleiding
Je bekijkt pagina 41 van 48
41
41
• Inside of oven: The oven should
always be cleaned after use when it
has cooled down. The cavity should be
cleaned using a mild detergent solution
and warm water. Suitable proprietary
chemical cleaners may be used only
RQ HQDPHO DIWHU ¿UVW FRQVXOWLQJ WKH
instructions supplied with the oven
cleaner and testing a small sample
on the oven cavity. Abrasive cleaning
agents or scouring pads/cloths should
not be used on the cavity surface.
NOTE: The manufacturers of this
appliance will accept no responsibility
for damage caused by chemical or
abrasive cleaning.
Let the oven cool down and pay
special attention not to touch the
hot heating elements inside the
oven cavity.
CORRECT REPLACEMENT OF THE
AUXILIARY, SEMI-RAPID AND RAPID
BURNERS
It is very important to check that the burner
ÀDPHGLVWULEXWRU³F” and the cap “C” have
EHHQ FRUUHFWO\ SRVLWLRQHG VHH ¿JV
7.2) - failure to do so can cause serious
problems with correct combustion and
may cause irreversible damage to the hob
surface.
CORRECT REPLACEMENT OF THE
DOUBLE RING COMPACT BURNER
The double ring compact burner must
EH FRUUHFWO\ SRVLWLRQHG VHH ¿J WKH
burner rib must be enter in their logement
DVVKRZQE\WKHDUURZVHH¿J
Then position the cap “A” and the ring “B”
¿JV
failure to do so can cause serious problems
with correct combustion and may cause
irreversible damage to the hob surface.
The burner correctly positioned must not
URWDWH¿J
BURNERS AND PAN SUPPORTS
These parts must be cleaned using a
sponge and soapy water or other suitable
non-abrasive products. Dry with a soft
cloth.
Warning! Not dishwasher safe.
$IWHUFOHDQLQJWKHEXUQHUVDQGWKHLUÀDPH
spreaders must be well dried and correctly
replaced.
It is very important to check that the burner
ÀDPH VSUHDGHU DQG WKH FDS KDYH EHHQ
correctly positioned. Failure to do so can
cause serious problems.
Check that the electrode “S´ ¿JV
7.3) next to each burner is always clean to
ensure trouble-free sparking.
Check that the probe “T´¿JVQH[W
to each burner is always clean to ensure
correct operation of the safety valves.
Both the probe and ignition plug must
be very carefully cleaned.
Note: To avoid damage to the electric
ignition do not use it when the burners
are not in place.
Note: Continuous use may cause a
change in the glaze around the burners
and grids, corresponding to the areas
exposed to the heat. This is a natural
phenomenon and does not prevent the
parts from working properly.
Bekijk gratis de handleiding van Delonghi DSR 916 GS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Delonghi |
| Model | DSR 916 GS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6724 MB |
Caratteristiche Prodotto
| Soort bediening | Draaiknop |
| Vermogen grill | 2200 W |
| Ingebouwd display | Ja |
| Breedte | 900 mm |
| Diepte | 600 mm |
