Handleiding
Je bekijkt pagina 97 van 103
Troubleshooting | 97
Product specific problems
Problem What you
experience
Possible solutions
Screen image is
too small
Image is
centered on
screen, but
does not fill
entire viewing
area
•Check the Aspect Ratio setting in the Display
menu OSD.
•Reset the monitor to factory settings.
Cannot adjust
the monitor
with the
buttons on the
front panel
OSD does not
appear on the
screen
•Turn o the monitor, unplug the monitor power
cable, plug it back, and then turn on the monitor.
•Check whether the OSD menu is locked. If yes,
move and hold the joystick forward/back/left/
right for 4 seconds to unlock.
No input signal
when user
controls are
pressed
No picture, the
LED light is
white
•Check the signal source. Ensure that the
computer is not in the power saving mode by
moving the mouse or pressing any key on the
keyboard.
•Check whether the signal cable is plugged
in properly. Connect the signal cable again, if
necessary.
•Reset the computer or video player.
The picture
does not fill the
entire screen
The picture
cannot fill the
height or width
of the screen
•Due to dierent video formats (aspect ratio) of
DVDs, the monitor may display in full screen.
•Run the built-in diagnostics.
No image
when using DP
connection to
the PC
Black screen •Verify which DP standard (DP 1.1a or DP 1.4) is
your Graphics Card certied to. Download and
install the latest graphics card driver.
•Some DP 1.1a graphics card cannot support DP
1.4 monitors.
Bekijk gratis de handleiding van Dell UltraSharp U2724DE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | UltraSharp U2724DE |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10628 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart, zilver |
| Gewicht verpakking | 10210 g |
| Stroom | 2.65 A |
| In hoogte verstelbaar | 150 mm |
| Beeldschermdiagonaal | 27 " |
