Handleiding
Je bekijkt pagina 59 van 66
59
Operating the monitor
If you adjust the Brightness level above the default level over 75%, the following message appears:
Yes
No
Adjusting to this value will increase power consumption above the default level.
Do you want to continue?
Figure 74. Power warning message
• When you select Yes, the power message is displayed only once.
• When you select No, the power warning message will pop-up again.
• The power warning message appears again only when you perform a Factory Reset from the OSD menu.
If either DP, HDMI, or USB-C input is selected and the corresponding cable is not connected, a dialog box is displayed.
NOTE: The message may slightly vary according to the selected input signal.
No DP Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/support/P3225DE
www.dell.com/support/P3225QE
Figure 75. DP cable disconnected warning message
or
No HDMI Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/support/P3225DE
www.dell.com/support/P3225QE
Figure 76. HDMI cable disconnected warning message
or
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/support/P3225DE
www.dell.com/support/P3225QE
Figure 77. USB-C cable disconnected warning message
See Troubleshooting for more information.
Bekijk gratis de handleiding van Dell Pro 32 Plus P3225QE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 32 Plus P3225QE |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10067 MB |
