Handleiding
Je bekijkt pagina 58 van 66
58
Operating the monitor
When the monitor enters the Standby Mode, the following message appears:
Going into Standby mode...
Figure 69. Standby mode warning message
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages appears depending on the selected input:
No DP Signal form your device.
If there is no display, press the monitor joystick to open up the
Press any key on the keyboard to wake up.
Menu and select the correct Input source.
Figure 70. Monitor wake-up warning message
A message is displayed while the cable supporting DP alternate mode is connected to the monitor under the following conditions:
• When Auto Select for USB-C is set to Prompt for Multiple Inputs.
• When the USB-C cable is connected to the monitor.
Select the primary use of the monitor’s USB-C connection:
Display PC screen while charging
Only charge device
Always display PC screen while charging
Figure 71. Auto Select for USB-C Warning message
If the monitor connects with two ports or more, when the Auto Input Source is selected, it will turn to the next port with signal.
Exit
DP HDMI
Auto
USB-C 90W
Figure 72. OSD-Auto Select for USB-C
Select OSD items of On in Standby Mode in Personalize feature, the following message appears:
Yes
No
Do you want to continue?
Changing to this setting ( without symbol) will increase power consumption.
Figure 73. Off in standby mode Warning message
Bekijk gratis de handleiding van Dell Pro 32 Plus P3225QE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 32 Plus P3225QE |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10067 MB |
