Handleiding
Je bekijkt pagina 57 van 66
57
Operating the monitor
Initial setup
Select OSD items of Factory Reset in Other feature, the following message appears:
Yes
Are you sure you want to reset to default settings?
No
Figure 65. Factory Reset warning message
When you select Yes to reset to default settings, the following message is displayed:
Yes
Select ‘Yes’ to enable the following
No
. Always on USB-C Charging
. Other USB Charging
function(s):
Figure 66. Reset to default settings
OSD warning messages
When the monitor does not support a particular resolution mode, you can see the following message:
The current input timing is not supported by the monitor display.
monitor listed timing as per the monitor specifications.
Please change your input timing to 2560x1440, 100Hz or any other
Figure 67. Does not support a particular resolution mode
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor specifications for
the horizontal and vertical frequency ranges addressable by this monitor.
NOTE: Recommended mode is 2560 x 1440 (P3225DE)/3840 x 2160 (P3225QE).
You can see the following message before the DDC/CI function is disabled:
Yes
The function of adjusting display setting using PC
No
application will be disabled.
Do you wish to disable DDC/CI function?
Figure 68. DDC/CI warning message
Bekijk gratis de handleiding van Dell Pro 32 Plus P3225DE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 32 Plus P3225DE |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10067 MB |
