Handleiding
Je bekijkt pagina 5 van 25
Disassembly and reassembly 5
Disassembly and reassembly
CAUTION: The information in this section is intended for authorized service technicians in the EMEA region. Dell prohibits
users from disassembling the monitor, and any damage caused by unauthorized servicing will not be covered under the
warranty.
Recommended tools
Phillips screwdriver #0
Phillips screwdriver #2
Nut driver 5 mm
Plastic scribe
Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then
place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when
the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a
component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list.
Component Screw type Quantity Screw image
Back cover hinge M4x4.5 2
Display middle-frame M3x4 9
Chassis assembly M3x3 4
Interface board M3x6 2
Power board M3x6 2
Power-board grounding M4x9 1
VGA port #4-40x11.8 2
Bekijk gratis de handleiding van Dell Pro 24 Plus E2425HM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 24 Plus E2425HM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10281 MB |
