Handleiding
Je bekijkt pagina 79 van 146
2. Remove the USB Type-C module from the system board.
Installing the USB Type-C module
CAUTION: The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the USB Type-C module and provide a visual representation of the installation
procedure.
Figure 49. Installing the USB Type-C module
Steps
1. Place the USB Type-C module into the slot on the bottom side of the system board.
2. Replace the three screws (M2x5) that secure the USB Type-C module in place.
3. Turn the system board over.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the heat sink.
4. Install the fan.
5. Install the wireless card.
6. Install the SSD.
7. Install the memory module.
8. Install the battery.
9. Install the base cover.
10. Follow the procedure in After working inside your computer.
Removing and installing Field Replaceable Units (FRUs)
79
Bekijk gratis de handleiding van Dell Pro 14 PC14255, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 14 PC14255 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 54332 MB |
