Dell Pro 14 Essential PV14255 Handleiding (140 Pagina's)

Handleiding

Installing the I/O-board cable

CAUTION: The information in this installation section is intended for authorized service technicians only.

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the I/O-board cable and provides a visual representation of the installation

procedure.

Figure 42. Installing the I/O-board cable

Steps

1. Place the I/O-board cable on the palm-rest and keyboard assembly.

2. Connect the I/O-board cable to the connector on the I/O board and close the latch.

3. Connect the I/O-board cable to the connector (IOBD1) on the system board and close the latch.

Next steps

1. Install the fan.

2. Install the base cover (plastic chassis) or the base cover (aluminum chassis), whichever is applicable.

3. Follow the procedure in After working inside your computer.

Removing and installing Field Replaceable Units (FRUs)

53

Bekijk gratis de handleiding van Dell Pro 14 Essential PV14255, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.