Dell Pro 14 Essential PV14255 Handleiding (140 Pagina's)

Handleiding

Installing the solid state drive

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE: If you are replacing the solid state drive with a new solid state drive, use the existing mounting bracket to install the

latter.

The following images indicate the location of the solid state drive and provide a visual representation of the installation

procedure.

Figure 24. Installing the solid state drive

Steps

1. Align the round notch on the solid state drive with the screw hole on the solid state drive bracket.

2. Replace the screw (M2x2) to secure the solid state drive to the solid state drive bracket.

3. Turn over the solid state drive bracket.

4. Align the notch on the solid state drive with the tab on the M.2 card slot (SSD1) on the system board.

5. At an angle, slide and place the solid state drive bracket, along with the solid state drive, in the M.2 card slot on the system

board.

6. Replace the screw (M2x3) to secure the solid state drive bracket to the palm-rest and keyboard assembly.

Next steps

1. Install the base cover (plastic chassis) or the base cover (aluminum chassis), whichever is applicable.

2. Follow the procedure in After working inside your computer.

34

Removing and installing Customer Replaceable Units (CRUs)

Bekijk gratis de handleiding van Dell Pro 14 Essential PV14255, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.