Handleiding
Je bekijkt pagina 81 van 149
Figure 37. Installing the I/O board
Steps
1. Place the I/O board in place.
2. Replace the three screws (M1.2x1.4) that secure the I/O board in place.
3. Replace the screw (M2x4) that secures the I/O board in place.
4. Connect the optional fingerprint-reader cable to the I/O board.
5. Connect the speaker cable and fan cable to the I/O board.
6. Connect the keyboard cable to the I/O board.
7. Peel back the USH daughter board FFC on the I/O board (applicable only for models shipped with a USH daughter board).
Next steps
1. Install the base cover.
2. Install the fan.
3. Install the display assembly.
4. Install the system board .
5. Install the 5G WWAN card.
6. Install the battery.
7. Install the M.2 2230 or M.2 2280 SSD, as applicable.
8. Install the SIM card (optional).
9. Follow the procedure in After working inside your computer.
Power button with optional fingerprint reader
Removing the power button with optional fingerprint reader
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
Removing and installing Field Replaceable Units (FRUs)
81
Bekijk gratis de handleiding van Dell Pro 13 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 13 Plus |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 55186 MB |
