Handleiding
Je bekijkt pagina 79 van 149
13. Connect the USH cable to the USH module and close the latch to secure the cable.
14. Connect the touchpad cable to the touchpad module and close the latch to secure the cable.
Next steps
1. Install the heatsink .
2. Install the M.2 2230 or M.2 2280 SSD, as applicable.
3. Install the 5G WWAN card.
4. Install the base cover.
5. Install the SIM card (optional).
6. Follow the procedure in After working inside your computer.
I/O board
Removing the I/O board
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card (optional).
3. Remove the base cover.
4. Remove the battery.
5. Remove the M.2 2230 or M.2 2280 SSD, as applicable.
6. Remove the 5G WWAN card.
7. Remove the system board.
NOTE: The system board can be removed and installed with the heat sink to preserve the thermal bond.
8. Remove the display assembly.
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs)
79
Bekijk gratis de handleiding van Dell Pro 13 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Pro 13 Plus |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 55186 MB |
