Handleiding
Je bekijkt pagina 88 van 155
Steps
1. Align and place the dummy graphics card into the slot on the system board.
2. Replace the two screws (M2x4) to secure the dummy graphics card in place.
3. Align and place the PC-bridge bracket into the slot on the system board.
4. Replace the two screws (M2x4) to secure the PC-bridge bracket in place.
Next steps
1. Install the heat sink.
2. Install the battery.
3. Install the base cover.
4. Install the SD card.
5. Follow the procedure in After working inside your computer.
System board
Removing the system board
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the M.2 2230 solid state drive or M.2 2280 solid state drive.
5. Remove the battery.
6. Remove the processor fan.
7. Remove the graphics-card fan.
8. Remove the heat sink.
88
Removing and installing Field Replaceable Units (FRUs)
Bekijk gratis de handleiding van Dell Precision 5690, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Precision 5690 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 67669 MB |
