Handleiding
Je bekijkt pagina 83 van 155
Figure 48. Interposer board
4. Remove the four screws (M1.6x4.5) that secure the graphics-card bridge in place.
5. Remove the graphics-card bridge from the system board.
6. Remove the two screws (M2x4) that secure the PC-bridge bracket in place.
7. Remove the PC-bridge bracket from the system board.
8. Remove the two screws (M2x4) that secure the graphics card in place.
9. Remove the graphics card from the system board.
Installing the graphics card
CAUTION: The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE: The following procedure is applicable for computers that are shipped with a graphics card only.
The following image indicates the location of the graphics card and provides a visual representation of the installation procedure.
Removing and installing Field Replaceable Units (FRUs)
83
Bekijk gratis de handleiding van Dell Precision 5690, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Precision 5690 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 67669 MB |
