Handleiding
Je bekijkt pagina 49 van 155
Steps
1. Align and place the base cover on the palm-rest assembly, and snap the base cover into place.
2. Replace the eight torx screws (T5, M2x3) to secure the base cover to the computer.
Next steps
1. Install the SD card.
2. Follow the procedure in After working inside your computer.
Solid state drive (SSD)
Removing the M.2 2230 solid state drive
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
About this task
The following images indicate the location of the SSD and provide a visual representation of the removal procedure.
NOTE:
The following procedure is applicable for models that are shipped with an M.2 2230 SSD in the SSD1 and/or SSD2
slot.
Removing and installing Field Replaceable Units (FRUs) 49
Bekijk gratis de handleiding van Dell Precision 5690, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Precision 5690 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 67669 MB |
