Handleiding
Je bekijkt pagina 41 van 103
Steps
1. Lift the Mylar to access the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot on the system board.
3. Slide the memory module into the memory-module slot on the system board.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components or metallic contacts on the memory module as electrostatic discharge (ESD) can inflict
severe damage on the components. To read more about ESD protection, see ESD protection.
4. Press down on the memory module till the securing clips click, locking the memory module in place.
NOTE: Repeat step 1 to step 4 to install any other memory modules installed in your computer.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Solid State Drive (SSD)
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
NOTE:
The support card configuration on the M.2 card slot is:
ā M.2 2230 solid-state drive + M.2 2230 solid-state drive mounting bracket
The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal
procedure.
Removing and installing Customer Replaceable Units (CRUs)
41
Bekijk gratis de handleiding van Dell Inspiron 14 7445 2-in-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Inspiron 14 7445 2-in-1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 39582 MB |
