Handleiding
Je bekijkt pagina 36 van 103
2. Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly.
NOTE: Upon loosening the captive screws, the base cover will open up creating a gap between the base cover and the
palm-rest assembly at the hinges.
3. Starting from the top-left corner at the hinge, pry the base cover to release the base cover from the palm-rest and keyboard
assembly.
4. Lift the base cover off the palm-rest and keyboard assembly.
5. Peel the tape that secures the battery cable to the system board and disconnect the battery cable from the battery-cable
connector (BATT1) on the system board.
Installing the base cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the base cover and provide a visual representation of the installation procedure.
Figure 16. Connecting the battery cable
36
Removing and installing Customer Replaceable Units (CRUs)
Bekijk gratis de handleiding van Dell Inspiron 14 7445 2-in-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Inspiron 14 7445 2-in-1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 39582 MB |
