Handleiding
Je bekijkt pagina 28 van 103
static wrist strap to discharge the static electricity from your body. For more information about the wrist strap and ESD
wrist strap tester, see Components of an ESD Field Service Kit.
ā Before transporting a static-sensitive component, place it in an anti-static container or packaging.
ESD Field Service kit
The unmonitored field service kit is the most commonly used service kit. Each Field Service kit includes three main components:
anti-static mat, wrist strap, and bonding wire.
CAUTION: It is critical to keep ESD-sensitive devices away from internal parts that are insulated and often
highly charged, such as plastic heat sink casings.
Working Environment
Before deploying the ESD Field Service kit, assess the situation at the customer location. For example, deploying the kit for a
server environment is different than for a desktop or laptop environment. Servers are typically installed in a rack within a data
center; desktops or laptops are typically placed on office desks or cubicles. Always look for a large open flat work area that
is free of clutter and large enough to deploy the ESD kit with additional space to accommodate the type of computer that is
being repaired. The workspace should also be free of insulators that can cause an ESD event. On the work area, insulators such
as styrofoam and other plastics should always be moved at least 12 inches or 30 centimeters away from sensitive parts before
physically handling any hardware components.
ESD Packaging
All ESD-sensitive devices must be shipped and received in static-safe packaging. Metal, static-shielded bags are preferred.
However, you should always return the damaged component using the same ESD bag and packaging that the new part arrived
in. The ESD bag should be folded over and taped shut and all the same foam packing material should be used in the original box
that the new part arrived in. ESD-sensitive devices should be removed from packaging only at an ESD-protected work surface,
and parts should never be placed on top of the ESD bag because only the inside of the bag is shielded. Always place parts in
your hand, on the anti-static mat, in the computer, or inside an ESD bag.
Components of an ESD Field Service kit
The components of an ESD Field Service kit are:
ā Anti-Static Mat ā The anti-static mat is dissipative and parts can be placed on it during service procedures. When using an
anti-static mat, your wrist strap should be snug and the bonding wire should be connected to the anti-static mat and to any
bare metal on the computer being worked on. Once deployed properly, service parts can be removed from the ESD bag and
placed directly on the anti-static mat. ESD-sensitive items are safe in your hand, on the anti-static mat, in the computer, or
inside an ESD bag.
ā Wrist Strap and Bonding Wire ā The wrist strap and bonding wire can be either directly connected between your wrist
and bare metal on the hardware if the anti-static mat is not required, or connect to the anti-static mat to protect hardware
that is temporarily placed on the mat. The physical connection of the wrist strap and bonding wire between your skin, the
anti-static mat, and the hardware is known as bonding. Use only Field Service kits with a wrist strap, anti-static mat, and
bonding wire. Never use wireless wrist straps. Always be cautious that the internal wires of a wrist strap are prone to
damage from normal wear and tear, and must be checked regularly with a wrist strap tester in order to avoid accidental ESD
hardware damage. It is recommended to test the wrist strap and bonding wire at least once per week.
ā ESD Wrist Strap Tester ā The wires inside an ESD strap are prone to damage over time. When using an unmonitored kit, it
is a best practice to regularly test the strap before each service, and at a minimum, test once per week. A wrist strap tester
is the best method for doing this test. To perform the test, plug the bonding-wire of the wrist-strap into the tester while it
is strapped to your wrist and push the button to test. A green LED is lit if the test is successful; a red LED is lit and an alarm
sounds if the test fails.
NOTE:
It is recommended to always use the traditional wired ESD grounding wrist strap and protective anti-static mat
when servicing Dell products. In addition, it is critical to keep sensitive parts separate from all insulator parts while servicing
the computer.
28 Working inside your computer
Bekijk gratis de handleiding van Dell Inspiron 14 7445 2-in-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Inspiron 14 7445 2-in-1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 39582 MB |
