Handleiding
Je bekijkt pagina 31 van 70
Steps
1 Using the alignment posts, adhere the keyboard-controller board into place on the palm-rest assembly.
2 Connect the keyboard-controller board-cable to the keyboard-controller board and close the connector latch.
3 Connect the keyboard cable to the keyboard-controller board and close the connector latch.
4 Connect the keyboard-backlight cable to the keyboard-controller board .
5 Replace the two screws (M2x1.9) that secure the keyboard-backlight cable to the keyboard-controller board.
Next steps
1 Install the battery.
2 Install the 2230 solid-state drive. (if applicable)
3 Install the 2280 solid-state drive. (if applicable)
4 Install the base cover.
5 Follow the procedure in After working inside your computer.
Left I/O-board
Removing the left I/O-board
Prerequisite
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the 2230 solid-state drive. (if applicable)
4 Remove the 2280 solid-state drive. (if applicable)
5 Remove the battery.
About this task
The following image indicates the location of the left I/O-board and provides a visual representation of the removal procedure.
31
Bekijk gratis de handleiding van Dell Alienware m15 R2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Alienware m15 R2 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 36660 MB |
