Handleiding
Je bekijkt pagina 24 van 70
Steps
1 Ensure that the palm-rest assembly is placed face up with the keyboard facing you.
2 Gently place the display assembly on the palm-rest assembly and align the screw holes on the display assembly to the
screw holes on the palm-rest assembly.
3 Replace the six screws (M2.5x5) that secure the display assembly to the palm-rest assembly.
4 Route the following cables to the routing guides on the palm-rest assembly.
– Display cable
– G-sensor cable
– Tobii eye tracker cable
– Antenna cables
5 Place the computer face down.
6 Connect the Tobii eye tracker cable to the connector on the system board.
NOTE: This step is only applicable to computers shipped with a Tobii eye tracker.
7 Connect the G-sensor cable to the connector on the system board.
8 Connect the display cable to the connector on the system board and close the latch.
24
Bekijk gratis de handleiding van Dell Alienware m15 R2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | Alienware m15 R2 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 36660 MB |
