Handleiding
Je bekijkt pagina 71 van 99
NOTE: If either the system board or the heat sink is replaced, use the thermal grease that is provided in the kit to
ensure that thermal conductivity is achieved.
3. Install the wireless card.
4. Install the M.2 2230 solid-state drive.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Power button
Removing the power button
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: Ensure that your computer is in Service Mode. For more information, see step 7 in Before working inside your
computer.
2. Remove the base cover.
3. Remove the I/O board.
About this task
The following image indicates the location of the power button and provides a visual representation of the removal procedure.
Figure 48. Removing the power button
Steps
1. Remove the screw (M2x3) that secures the power button to the palm-rest and keyboard assembly.
2. Lift the power button off the palm-rest and keyboard assembly.
Removing and installing Field Replaceable Units (FRUs)
71
Bekijk gratis de handleiding van Dell 14 Plus DB14250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dell |
| Model | 14 Plus DB14250 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 38915 MB |
