Handleiding
Je bekijkt pagina 4 van 13
• “A” 1 x Stability chain
• “B” 1 x Stability hook with anchor sleeve
• “A” is factory fitted at the rear of the stove in
the centre. (See overleaf for instructions if the
removable splashback is to be fitted)
• Position the stove and move “A” to touch the
wall behind the stove.
• Mark the hole where “A” touches the wall
behind the stove.
All stoves can tilt if you or a child sit
or lean on an open oven door.
Safety regulations stipulate that the
ANTI-TILT mechanism supplied with
the stove, must be fitted as shown.
• Move the stove away from the wall to allow
for an area to work in.
• Using a 8.0 mm concrete bit, drill a hole at
the marked position.
• Using the Stability hook and anchor sleeve
“B”, firmly secure “B” to the wall.
• Slide the stove back in position and engage
the stability chain “A” onto the Stability hook
“B”. It is recommended to secure the chain
on the third link from the rear of the cooker.
• The stove is then secured and will not
accidentally tilt if downward pressure is
applied to the open oven door.
Accessories supplied may vary depending on the model. Not all accessories in the user
manual may be included with your appliance. Accessories may be purchased from Defy
spares.
Fitting the removable splash panel
Anti-tilt mechanism
Page 3
Items Supplied:
A – M4 Bolts p4-x2
B – Splash Panel p4-x1
C – Nut p4-x2
D – Washer p4-x2
Bekijk gratis de handleiding van Defy DSS553, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Defy |
| Model | DSS553 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1536 MB |
