Handleiding
Je bekijkt pagina 19 van 22
Page 19
Cleaning the control panel
Clean the control panel and knobs with a
damp cloth and wipe them dry.
1 Knob
2
Sealing
element
Do not remove the control
buttons/knobs to clean the control
panel. Control panel may get
damaged!
Gas Jet Cleaning Procedure
• Every six months the gas jets on your hob should be cleaned to ensure continued efficient
and safe operation.
• This may be done using a Gas Jet Cleaning Kit which may be purchased from your nearest
Defy Service Centre.
• The kit comprises of a sliding T-bar (A) a socket (B) and a ‘Classic pin’ (C).
• Fit the T-bar to the socket and remove the pot stand, burner cap and burner body.
1. Insert the socket into the central tube of the burner so that it locates over the brass gas jet
at the bottom of the tube.
2. Gently loosen the brass gas jet by turning the socket in an anti-clockwise direction.
3. Carefully lift the socket and loosened brass gas jet from the central burner tube.
4. Insert the Classic pin into central hole of the jet and slide it up and down until the jet is free
of accumulated dirt.
5. Re-assemble in reverse order.
6. Clean all the burner jet in the manner described above.
Bekijk gratis de handleiding van Defy DHG606, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Defy |
| Model | DHG606 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3390 MB |
