Handleiding
Je bekijkt pagina 10 van 73
9 /36 EN
Refrigerator / User manual
3 Installation
Always have the installation and repairing
procedures carried out by the Authorized Service
Agent. Manufacturer shall not be held liable for
damages that may arise from procedures carried
out by unauthorized persons.
Refer to the nearest Authorized Service Agent for
installation of the product. To make the product
ready for use, make sure that the electricity
installation is appropriate before calling the
Authorized Service Agent. If not, call a qualified
electrician to have any necessary arrangements
carried out.
C
Preparation of the location and electrical
installation at the place of installation is
under customer's responsibility.
B
Product must not be plugged in during
installation. Otherwise, there is the risk
of death or serious injury!
B
WARNING: Installation and electrical
connections of the product must be
carried out by the Authorised Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorised
persons.
A
WARNING: Prior to installation, visually
check if the product has any defects
on it. If so, do not have it installed.
Damaged products cause risks for your
safety.
C
Make sure that the power cable is not
pinched or crushed while pushing the
product into its place after installation or
cleaning procedures.
3.1. Appropriate installation
location
A
WARNING: If the door of the room where
the product will be placed is too small for
the product to pass, then the product's
doors must be removed and the product
must be turned aside to pass it through.
t$IPPTFBQMBDFBUXIFSFZPVXPVMEVTFUIF
product comfortably.
t*OTUBMMUIFQSPEVDUBUMFBTUDNBXBZGSPN
heat sources such as hobs, ovens, heater
cores and stoves and at least 5 cm away
from electrical ovens. Product must not be
subjected to direct sun light and kept in
humid places after installation.
t:PVSQSPEVDUSFRVJSFTBEFRVBUFBJS
circulation to function efficiently. If the
product will be placed in an alcove,
remember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls.
t*GUIFQSPEVDUXJMMCFQMBDFEJOBOBMDPWF
remember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls. Check if the rear
wall clearance protection component is
present at its location (if provided with the
product). If the component is not available,
or if it is lost or fallen, position the product
so that at least 5 cm clearance shall be left
between the rear surface of the product and
the wall of the room. The clearance at the
rear is important for efficient operation of the
product.
t%POPUQMBDFUIFQSPEVDUPOUIFNBUFSJBMT
such as rugs or carpets.
t1MBDFUIFQSPEVDUPOBOFWFOGMPPSTVSGBDFUP
prevent jolts.
Bekijk gratis de handleiding van Defy DAC840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Defy |
| Model | DAC840 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 9000 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Kleur van het product | Roestvrijstaal |
| Ingebouwd display | Ja |
| Gewicht | - g |
| Breedte | 840 mm |
