De Dietrich DPI4400B handleiding
Handleiding
Je bekijkt pagina 36 van 363
16
Temperature limiter
Each cooking ring is tted with a safety
sensor that continuously monitors the
temperature of the bottom of the pan.
In the event that an empty pan is left on
a zone that is switched on, the sensor
automatically adapts the power delivered
by the hob and limits the risk of damaging
the cookware or the hob.
Spillage protection
The hob may be switched off in the following
three cases:
- Spillage covering the control keys.
- Damp cloth placed over the keys.
- Metal object placed on the control keys.
Remove the object or clean and dry the
control keys to restart cooking.
In these cases, the symbol is displayed
accompanied by an audible signal.
"Auto-Stop" System
If you forget to switch off a pan, your hob
has an “Auto-Stop” safety function that
automatically switches off the forgotten
cooking ring after a pre-set time (between
1 and 10 hours based on the power level
setting).
If the safety system is triggered, the
cooking ring is shown as switched off with
"AS" displayed on the control panel and a
beep sounds for about 2 minutes. To stop it,
simply press any of the control keys.
•
4
USE
Sounds similar to the ticking of a
clock may be heard.
These sounds occur when the hob is in
operation and disappear or decrease
according to the heating conguration.
There may also be whistling sounds
depending on the model and quality of
your cookware. Such noises are a normal
part of induction technology and do not
indicate a fault.
We do not recommend using any hob
protection mechanisms.
Bekijk gratis de handleiding van De Dietrich DPI4400B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | De Dietrich |
| Model | DPI4400B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 35756 MB |
