De Dietrich DOP4543B handleiding
Handleiding
Je bekijkt pagina 60 van 628
29
• 9 CARE
This oven is equipped with a pyrolytic
self-cleaning function: Pyrolysis is a cycle
during which the oven cavity is heated to a
very high temperature in order to eliminate
soiling from splattering and spills. Before
starting pyrolysis cleaning, remove any
large overspills, if any. Remove the excess
grease on the door using a damp sponge.
As a safety measure, cleaning only occurs
after the door locks automatically; it is
impossible to unlock the door.
Three pyrolysis cycles are proposed. The
durations are pre-selected and cannot be
modied:
Remove the accessories and supports from the oven before beginning pyrolysis
cleaning. Before starting a pyrolysis cleaning cycle, make sure that any
accessories that are not pyrolysis safe have been removed from the oven (sliding
rails, chrome-plated racks) as well as any cookware.
Pyro Auto: between 1h30 and 2h15
for an energy-saving cleaning cycle.
Pyro Express: This function, which
is also accessible once cooking is nished,
uses the heat built up during a previous
cooking cycle to quickly and automatically
clean the inside of the oven: it cleans a
mildly dirty cavity in less than an hour.
If the heat inside your oven is sufcient: this
pyrolysis takes as little as 59 min, and up
to 1h30.
Pyro 2H: in 2h for more in-depth
cleaning of the inside of the oven.
PERFORM A SELF-CLEANING CYCLE
PYROLYTIC SELF-CLEANING
Bekijk gratis de handleiding van De Dietrich DOP4543B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | De Dietrich |
| Model | DOP4543B |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 64045 MB |
