De Dietrich DKR4741X handleiding
Handleiding
Je bekijkt pagina 62 van 631
28
• 9 CARE
This oven is equipped with a pyrolysis
cleaning function:
Pyrolysis is a cycle during which the oven
cavity is heated to a very high temperature
in order to eliminate soiling from splattering
and spills.
Before starting pyrolysis cleaning, remove
any large overspills, if any. Remove the
excess grease on the door using a damp
sponge.
As a safety measure, cleaning only occurs
after the door locks automatically; it is
impossible to unlock the door.
PROGRAMMING A PYROLYSIS
CLEANING CYCLE
Two pyrolysis cycles are available. The
durations are pre-selected and cannot be
modied:
Pyro ECO: in 1h30
for cleaning to save energy.
Turbo Pyro: in 2h
for more in-depth cleaning of the
inside of the oven.
Remove the accessories from the
oven before beginning pyrolysis
cleaning. Before starting a pyrolysis
cleaning cycle, make sure that any
accessories that are not pyrolysis safe
have been removed from the oven
(sliding rails, baking trays, chrome-
plated grills, and so on) as well as any
cookware.
“CLEANING” FUNCTION
(the cavity)
PYROLYTIC SELF-CLEANING
IMMEDIATE CLEANING
- Select the "CLEANING" function
when you are in the general menu
then conrm.
- Select the most suitable self cleaning
cycle, for example Turbo Pyro, and
conrm.
The pyrolysis cycle begins. The time
starts to count down immediately it is
set.
During pyrolysis, the symbol
displays
in the programmer to indicate that the
door is locked.
At the end of the pyrolysis cycle, 0:00
ashes.
A cooling phase occurs after each
pyrolysis and your oven remains
unavailable during this time.
When the oven is cool, use a
damp cloth to remove the white
ashes. The oven is clean and once
again ready for the cooking
application of your choice.
SELF CLEANING WITH DELAYED
START
Follow the instructions described in the
previous section.
- Select the cooking function symbol.
- Set the pyrolysis end time you want
with the control knob and conrm.
After these steps, the oven switches
to standby and the start of pyrolysis
is delayed so that it nishes at the
programmed time.
When the pyrolysis is complete, switch
your oven o by pressing the
key.
Bekijk gratis de handleiding van De Dietrich DKR4741X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | De Dietrich |
| Model | DKR4741X |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 64643 MB |
