DB Technologies VIO L208 handleiding
Handleiding
Je bekijkt pagina 36 van 148
36
VIO-L208
Cod. 420120268 REV. 1.1
MECHANICS
The module ergonomics and the quick assembly in line arrays are guaranteed by:
FRONT SIDE
1) Lower fastening system for connecting other modules or the TF-VIO1/AF/VIO1/DSA-VIOL208 frame (in
own/stacked conguration depending on the accessory).
2) Retractable brackets for fastening to an upper module (or to a DRK-208 y-bar in own conguration).
3) Pins for fastening the retractable brackets in open/closed position [2].
REAR SIDE
4) Central bracket. Equipped with graduated label for selecting the angle of the line-array module.
Steps every 1° are possible (range: 0-10°).
5) Pin for xing the angle of inclination: it is necessary to insert only 1 pin in own conguration, 2 in
stacked conguration. See the gures on page 9.
6) Movable arm with slot. Inserted in bracket [4], it mechanically fastens the unit at the selected angle by
means of pins [5].
RH AND LH SIDES
7) Handle in a balanced position with respect to the weight of the cabinet.
8) Handle in the back position in the cabinet, facilitating the lifting of a module on the back, when the front
side is xed.
The VIO-L208 modules are also equipped with 2
rain covers on the rear side, in order to protect the
amplier from water and allow operation even in
critical weather conditions. They will be no longer
shown in the following drawings, for simplicity.
For further information regarding the y-bar (see the
ACCESSORIES section), please refer to the relevant
manual.
English
Bekijk gratis de handleiding van DB Technologies VIO L208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DB Technologies |
| Model | VIO L208 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 37140 MB |
