Dateq SPL-2TS handleiding
Handleiding
Je bekijkt pagina 26 van 54
10
Operation
SPL2(TS) and SPL3(TS) user manual
EN
USB-connector. The installation engineer or authority that calibrates the limiter is able to
program the limiter, with the aid of a special computer program. Each day of the week is divided
into 3 TimeSlots. The attenuation of each timeslot and the timeslot boundaries can be programmed
with this program. Also special bypass-periods can be set: periods during which the limiter-functions
are not active, for example during special events. 20 Different bypass periods can be programmed.
The computer program is able to make a hardcopy of the data programmed in your limiter. It is useful
to keep a hardcopy with the limiter, so the programmed data can always be checked. If your
installation engineer or the calibrating authority doesn't have this program at his disposal, please
contact your DATEQ-representative. With some restrictions, software is available freely.
In the carton you will find a USB stick with the new interface software. Connect the limiter to the
computer, start the software and the following screen will be loaded.
Click on “connect”
The clock in the timer can be synchronized with the clock of your computer. If a DSR (license file)
is present on your system you can make adjustments to the time slots of your limiter.
Bekijk gratis de handleiding van Dateq SPL-2TS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dateq |
| Model | SPL-2TS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8088 MB |
