Handleiding
Je bekijkt pagina 19 van 36
Function
This allows the user to set advanced settings for the TLM-102K, such as the scan mode,
the aspect ratio, underscan mode, H/V delay, check field, zoom, etc. Details of how
these functions can be configured are described as follows:
Scan
This sets the Scan mode of the TLM-102K.
Zoom: Enlarge the original image according to the zoom ratio of the TLM-102K.
Aspect: Display the image according to the aspect ratio of the TLM-102K.
Pixel to Pixel: Display the original image resolution without scaling to match a certain
resolution or an aspect ratio. For example, when the resolution of the input video is
1920x1080 but the monitor’s resolution is only 1280x800, only area equivalent to
1280x800 out of 1920x1080 will be displayed.
Aspect
The aspect control allows you to manually set the aspect ratio of the monitor. You
should choose the aspect ratio of your screen to match that of the input video in order
to achieve the best viewing experience. Views of different aspect ratios on the TLM-
102K are shown in the diagram below.
Note: Aspect ratio control is disabled if the scan mode is set to pixel to pixel.
Bekijk gratis de handleiding van DataVideo TLM-102K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DataVideo |
| Model | TLM-102K |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 8279 MB |