Datapath Hx4 handleiding
Handleiding
Je bekijkt pagina 20 van 33
Cabling
Chapter 6 - Cabling
This chapter will cover:
Attaching HDMI Cable Lock.
Connecting input sources.
Connecting a loop-through output cable.
Connecting the outputs to monitors
Cable lengths
6.1 Attaching an HDMI Cable Lock
The Hx4 is supplied with HDMI cable locks which should be used on non lockable HDMI cables to ensure they remain rmly
attached to the Hx4.
Connecting an HDMI Input Cable
6.3 Connecting Your Input Source
The Datapath Hx4 has one dedicated HDMI input connector. It is strongly recommended that locking cables are used to
prevent the input source cable from becoming detached from the Hx4. HDMI Cable Locks are provided and should be attached
to your cables as shown above:
Thread the cable tie through the
holes in the side of the cable lock.
Sit the cable lock on the top of the
HDMI cable connector ensuring the
cable lock is ush with the front of
the shroud on the HDMI connector.
Pull the cable tie tightly and ensure
it ts rmly on the HDMI connector
shroud.
20
Bekijk gratis de handleiding van Datapath Hx4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Datapath |
| Model | Hx4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5125 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1860 g |
| Breedte | 316 mm |
| Diepte | 172 mm |
| Hoogte | 42 mm |
