Datapath Fx4-HDR handleiding
Handleiding
Je bekijkt pagina 7 van 44
STEP 3 CONNECT A MAINS CABLE
When the power is switched on, the Fx4-HDR will boot and the LEDs on the
front panel will ash for up to 15 seconds. Should the LED’s continue to ash,
see the troubleshooting section.
STEP 4 CONNECTING TO A PC
To successfully congure the Fx4-HDR, install the Wall Designer application on your PC by
downloading the latest version from the Datapath website: www.datapath.co.uk.
When the Fx4-HDR has booted, connect to your PC using the USB cable provided. The Fx4-HDR
unit is a plug and play device. Wall Designer will detect it when layouts are congured.
The Fx4-HDR can also be congured via a Network. See Step 5.
HDCP 1.4 HDCP 1.4 HDCP 2.2 HDCP 2.2
INPUTS HDR
SYNC
OUT 1 2
MONITOR OUTPUTS
LAN USB
100-240V 1AMAX 50\60Hz 1A FUSE
MODEL 218
MADE IN ENGLAND
31 2 3 4
LOOP
HDCP 1.4 HDCP 1.4 HDCP 2.2 HDCP 2.2
INPUTS HDR
SYNC
OUT 1 2
MONITOR OUTPUTS
LAN USB
100-240V 1AMAX 50\60Hz 1A FUSE
MODEL 218
MADE IN ENGLAND
31 2 3
4
LOOP
HDCP 1.4 HDCP 1.4 HDCP 2.2 HDCP 2.2
INPUTS HDR
SYNC
OUT 1 2
MONITOR OUTPUTS
LAN
USB
100-240V 1AMAX 50\60Hz 1A FUSE
MODEL 218
MADE IN ENGLAND
31 2 3 4
LOOP
HDCP 1.4 HDCP 1.4 HDCP 2.2 HDCP 2.2
INPUTS HDR
SYNC
OUT 1 2
MONITOR OUTPUTS
LAN USB
100-240V
1AMAX 50\60Hz 1A FUSE
MODEL 218
MADE IN ENGLAND
31 2 3 4
LOOP
Power Switch
USB Port
Connect Mains cable
7
Fx4-HDR User Guide
Bekijk gratis de handleiding van Datapath Fx4-HDR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Datapath |
| Model | Fx4-HDR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6640 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Breedte | 316 mm |
| Diepte | 172 mm |
| Hoogte | 42 mm |
| Temperatuur bij opslag | -20 - 70 °C |
