DAP Audio ZA-9250VDAB handleiding
Handleiding
Je bekijkt pagina 11 van 28
10
ZA-9250VDAB
Ordercode: D6159
Backside
Fig. 02
Cooling fan
Do not obstruct the air inlet.
IEC power connector 115–230 V AC 50/60 Hz + fuse T4AL/250V
Connect the device to the appropriate power supply.
AC selector
Before connecting your ZA-9250VDAB to the mains, make sure that the AC selector is set to the
proper voltage which is used in your country. In case of doubt, consult a technician.
1-4 unbalanced line level OUT
Use those connectors to extend your PA system, by means of additional amplifiers, per zone.
75Ω FM antenna connector
Connect your FM/DAB+ antenna to this connector.
Loop through RCA IN/OUT
Loop through input and output connections allow external sound processing equipment to be
connected between the preamplifier and the power amplifier stages.
Aux – RCA IN
Connect an auxiliary signal source. The source selector (10) must be set to 6.
Video – RCA IN
Connect a video signal source. The source selector (10) must be set to 5.
CD – RCA IN
Connect a CD signal source. The source selector (10) must be set to 4.
Bekijk gratis de handleiding van DAP Audio ZA-9250VDAB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DAP Audio |
| Model | ZA-9250VDAB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3214 MB |
