DAP Audio PA-530DAB handleiding
Handleiding
Je bekijkt pagina 18 van 24
17
PA-530DAB
Ordercode: D6156
Connecting Outputs
Speakers are connected by means of terminal connectors. See the examples below.
Low Impedance Outputs
You can use as many speakers as you want as long as the total impedance matches the amplifiers
output.
Example 1: Using the 8Ω output with an 8Ω speaker.
Fig. 05
Example 2: Using the 8Ω output with two 4Ω speakers.
Fig. 06
In a low impedance system, the total speaker load should always match the amplifier’s
impedance, in order not to overload the amplifier. The total speaker power should be at
least equal to the power of the amplifier, to avoid speaker damage.
High Impedance Outputs
While using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.
The total power of all speakers summed together should never exceed the total power of
the amplifier in a 70V or a 100V system!
Example 3: 70 V or 100 V setup
Fig. 07
Bekijk gratis de handleiding van DAP Audio PA-530DAB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | DAP Audio |
| Model | PA-530DAB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3027 MB |
