Handleiding
Je bekijkt pagina 11 van 52
en
5. Press "CONTROL UNIT" and then "REGISTER" to start the registration.
ð You have 12hours to complete the registration. After that, the GSM connection will
be disconnected. To attempt the registration once more, unplug and then plug in
the Simplify Control Unit again.
6. Position the Simplify Control Unit, e.g. using the magnets on the back.
7. Connect theSimplify Control Unit to a socket outlet (figure4 and wait until the LED
flashes green.
ð LED flashing orange: Simplify Control Unit searching for Ethernet or GSM signal
ð LED lights up orange: Simplify Control Unit connected
ð LED flashing red: Backup battery defective
ð LED lights up red: No mains voltage, backup battery active
ð LED flashing green: Simplify Control Unit is ready for connecting the components
ð LED lights up green: All scanned components are connected
8. Connect each Simplify Relay Box to a properly earthed socket outlet and monitor the
connection to theSimplify Control Unit (Fig.5).
ð 1 beep: Simplify Relay Box switched on
ð 3 beeps: Simplify Relay Box connected with Simplify Control Unit
9. Connect the equipment to each Simplify Relay Box (Fig.6).
10. Position each Simplify Sensor Box one after another and connect each corresponding
Simplify Sensor Probe. For this, pull back the handle part of the plug before plugging it
in. This switches the Simplify Sensor Box on. (Fig.7).
ð 2 beeps: Simplify Sensor Box switched on and Simplify Sensor Probe is working
ð 3 beeps: Simplify Sensor Box connected
ð 1 beep: battery is working, but defective Simplify Sensor Probe
ð No beep: Battery empty or missing
11.
Connect other accessories if given (e.g. a DanthermCDT MKII and MKIII condensing
dehumidifier with Simplify Integration Box) and connect them to theSimplify Control
Unit.
12. Using the link below, check if all components are connected with the Simplify Control
Unit and are active in the Simplify Dashboard (Fig.8). If a component does not connect
after 10minutes, reposition the component or the Simplify Control Unit.
ð https://simplifyclimatesolutions.com
13. For further information, you can find the current version of the detailed operating in-
structions under the link or the QR code on the back of these instructions.
11
Bekijk gratis de handleiding van Dantherm Simplify, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dantherm |
| Model | Simplify |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4499 MB |