Dantherm RCV 320P2 handleiding
Handleiding
Je bekijkt pagina 30 van 56
30
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Installation Options: Switching between modes A and B
4 Move the cable port, incl. hu-
midity sensor (and VOC sensor, if
present), to the sensor position
for mode B.
CAUTION
Insucient device perfor-
mance and ventilation eect
To ensure optimal device
performance, all wired
accessories must be tted
correctly.
• Make sure that the distance
between the sensor head
and the cable port is
50mm to ensure correct
measurements of humidity
level (and air quality).
• All other wired accessories
must be swapped/installed
according to the current
operating mode A/B.
5 Ret the main PCB and housing and the front cover.
6 Switch the drain hose and set it
to mode B as indicated.
For a further description of how
to install the drain hose, see
page 36.
Mode B Mode A
7 Change the lter (ONLY if the
optional pollen lter ePM1>50%
is used).
• Check the table on page 18
to determine the correct posi-
tion of the ePM1>50% lter in
mode A/B.
8 Decide if you want to use the side or bottom outlet (described on page 31) and
then continue following the instructions of the section “Installation” on page 31.
Warning
Caution
Bekijk gratis de handleiding van Dantherm RCV 320P2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dantherm |
| Model | RCV 320P2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5554 MB |
