Dantherm HCV 700 handleiding

60 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 34 van 60
34
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Installation: Mounting the device
3 Connect the drain hose to the
drain outlet in use and secure the
connection with a hose clamp.
4 The drain hose must be tted
with a water trap of min. 100mm
(option A or B).
Route the hose to a drain and
ensure that it is not exposed
to frost.
Fill the water trap with min.
0.5 L water.
5 HCV 400/460 only
Mount the cable clamp in the
hole in the bottom of the unit
Pass the drain hose through
the cable clamp to form a
water trap.
Material damage (e.g. water damage)
Heat recovery of air with a high moisture content leads to condensation in the heat ex-
changer. Condensate must be led into a drain, as it otherwise may damage the oor under
the unit.
Make sure that the drain hose is installed according to the current operating mode.
Check the water trap regularly, especially during the summer, and make sure it is lled
with water as recommended.
A
B
Warning
Caution
WARNING

Bekijk gratis de handleiding van Dantherm HCV 700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDantherm
ModelHCV 700
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4620 MB