Danfoss PVED-CC handleiding
Handleiding
Je bekijkt pagina 9 van 72
PVED-CC introduction
The Danfoss PVED-CC is a digital (D) controlled PVE-Series 4 actuator for PVG 32 and PVG 100. The PVED-
CC follows the modular Danfoss concept.
CC is an abbreviation for CAN bus Communication. The communication is compliant to the SAE J1939
protocol and the ISOBUS standard for flow control.
The PVED-CC has proven its worth and is used in various types of automotive hydraulic applications with
high demands to precision and controllability.
The PVED-CC can be controlled by a Danfoss PLUS+1
®
GUIDE application or other devices capable of
using communication as defined in this Technical Information.
Customizing of the PVED-CC is done by parameter setting. Settings can be made by the PLUS+1
®
Service
Tool, the WebGPI service tool or by a CAN gateway that have the same abilities.
PVG with PVED-CC can be delivered with customer defined settings out of factory.
PVG with PVED-CC
PVED-CC with DEUTSCH connector PVED-CC with AMP connector
PVE stands for PVE actuator
The Danfoss PVE is built on more than thirty years experience of electrical valve control and is the perfect
fit for our high performance proportional valves PVG 32, PVG 100 and PVG 120, as it is for our EH steering.
All our products are developed in close cooperation with system manufacturers from the mobile
hydraulic market. That is the reason for our high performance in all market segments
Technical Information PVED-CC, Series 4 Electrohydraulic Actuator
General information
520L0665 • Rev 0307 • October 2015 9
Bekijk gratis de handleiding van Danfoss PVED-CC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Danfoss |
| Model | PVED-CC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10538 MB |
