Danby DVAC080B2WDB handleiding
Handleiding
Je bekijkt pagina 18 van 68
OPERATING INSTRUCTIONS
17
REMOTE CONTROL
1. Display panel: Displays the set temperature, the
ambient temperature and the timer settings. To
change the temperature scale being displayed,
press the °C/°F button.
2. Up and down arrows: Used to adjust the set
temperature in 1° increments and the timer
function in 30 minute increments up to 10 hours
and then in 1 hour increments up to 24 hours.
3. Mode button: Used to choose the operating
mode.
4. Follow me button: Used to set the follow me
function.
5. °C/°F button: Use to change the temperature
scale.
6. LED button: Press to turn the LED back light on
or off.
7. Power button: Used to turn the appliance on or
off.
8. Sleep button: Used to set the sleep function.
9. Fan button: Used to set the fan speed. The fan
can be set to low, medium, high and auto.
10. Timer buttons: Used to set the auto on and auto
off timers.
11. Energy saver button: Used to set the energy
saver function.
12. Lock button: Press the °C/°F button and the
timer button at the same time to lock the remote
control and prevent the settings from being
inadvertently changed.
TEMP
1
2
3
4
5
6
7
8
9
10
11
12
REMOTE CONTROL BATTERIES
The remote control requires two AAA alkaline
batteries (included). Batteries should be replaced
when:
a) No sound is heard when attempting to program
the appliance.
b) The appliance does not respond to a command
issued by the remote control.
Battery replacement:
1. Slide the rear cover on the remote in the
direction of the arrow.
2. Insert two AAA batteries following the same
orientation depicted inside the battery chamber
(+/-).
3. Reinstall the rear cover.
4. If the remote control will not be used for
extended periods of time, the batteries should be
removed.
Notes:
• Protect the remote control from high
temperatures, and keep it away from radiation
exposure.
• Keep the control panel receiver out of direct
sunlight.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh,etc) batteries.
• The remote operates within a range of 8 meters
(26 ft.) from the receiver located inside the main
appliance. Any obstruction between the receiver
and remote may cause signal interference,
limiting the ability to program the main unit.
Bekijk gratis de handleiding van Danby DVAC080B2WDB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Danby |
| Model | DVAC080B2WDB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6672 MB |
