Danby DRC12B1DBD handleiding
Handleiding
Je bekijkt pagina 11 van 36
10
Cooking Zone Minimum (mm) Maximum (mm)
6 5/16” (160mm)
5 1/2” (140mm) 6 5/16” (160mm)
8 9/32” (210mm)
6 5/16” (160mm) 8 9/32” (210mm)
OPERATING INSTRUCTIONS
DETECTION OF COOKWARE
If the display flashes alternately with heat setting
• You have not placed any cookware on the selected cooking zone
• The cookware is not suitable for induction cooking
• The cookware is too small or not centered correctly on the cooking zone
Notes:
• No heating takes place unless there’s suitable cookware on the cooking zone
• The display will turn off automatically after 2 minutes if there is no suitable cookware placed on it
• When unsuitable size or non-magnetic cookware (or some other small item like a knife, key, fork) has
been left on the cooktop, the corresponding cooking zone will automatically turn off in 1 minute
Cautions:
• It is important to only use metal pans designed specifically for induction, or ones that are approved for
use with induction
• Never allow melamine or plastic containers to come into contact with the heat zones
Cookware size for Induction
Cooking zones are, up to a limit, automatically adapted to the diameter of your cookware. However,
cookware with a diameter less than 140mm may not be detected by the induction cooktop. Below is the
best base diameter of cookware for your induction cooktop:
Bekijk gratis de handleiding van Danby DRC12B1DBD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Danby |
| Model | DRC12B1DBD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3185 MB |
