Danby DR24V1WH handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 52
INSTALLATION INSTRUCTIONS
11
GAS CONNECTION
Assembly of gas supply and leakage check
Connect the appliance in accordance with applica-
ble local and international standards and regula-
tions. First, check what type of gas is installed on the
cooker. This information is available on a sticker on
the back of the cooker. You can find the information
related to appropriate gas types and appropriate
gas injectors in the technical data table. Check that
the feeding gas pressure matches the values on the
technical data table, to be able to get the most effi-
cient use and to ensure the minimum gas consump-
tion. If the pressure of used gas is different than the
values stated or is not stable in your area, it may be
necessary to assemble an available pressure regu-
lator on the gas inlet. You should contact an autho-
rized service center to make these adjustments.
Points that must be checked during flexible
hose assembly
If the gas connection is made by a flexible hose
fixed onto the gas inlet of the hob, it must be
fixed on by a pipe collar.
Connect your appliance with a short and dura-
ble hose that is as close as possible to the gas
source.
The maximum permitted length of the hose is 36
inches (90 cm).
The device should be connected in line with the
relevant local gas standards.
The hose must be kept clear of areas that may
heat up to temperatures of more than 194 ºF
(90 ºC).
The hose must not be cracked, torn, bent or
folded.
Keep the hose clear of sharp corners and objects
that could move.
Before you assemble the connection, you must
make sure the hose is not damaged. Use bubbly
water or leakage fluids to perform the check. Do
not use a naked flame to check for gas leakage.
All metal items that are used during gas connec-
tion must be free from rust. Check the expiration
date of any components used for connection.
Points that must be checked during fixed
gas connection assembly
This appliance has been tested in accordance with
the following standards:
ANS Z21.1: Household Cooking Appliances
CSA 1.1: Household Cooking Appliances
CAN / CSA-C 22.2 No 61-M89 Household
Cooking Ranges
In Canada : Installation shall be in accordance
with CAN 1-B149.1 and CAN 1-B149.2 Instal-
lation Codes for Gas Burning Appliances and or
local codes.
It is the responsibility of the owner and the
installer to determine if additional requirements,
such as local codes and/or standards, apply to
specific installations. The installation shall con-
form with local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54 or, in Canada, the Natu-
ral Gas and Propane Installation Code, CSA
B149.1.
The method used to assemble a fixed gas connec-
tion (gas connection made by threads, e.g. a nut)
varies according to the country you are in. The most
common parts for your country will be supplied with
your appliance. Any other parts required can be
supplied as spare parts.
During connection, always keep the nut on the gas
manifold fixed while rotating the counter-part. Use
appropriately-sized spanners for a secure connec-
tion. For surfaces between different components
always use the seals provided in the gas conversion
kit.
The seals used during connection should also be
approved to be used in gas connections. Do not use
plumbing seals for gas connections.
Remember that this appliance is ready to be con-
nected to the gas supply in the country for which it
has been produced.
The main country of destination is marked on the
rear cover of the appliance. If you need to use it in
another country, any of the connections in the figure
below may be required. In such a case, contact
local authorities to learn the correct gas connection.

Bekijk gratis de handleiding van Danby DR24V1WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDanby
ModelDR24V1WH
CategorieFornuis
TaalNederlands
Grootte6271 MB