Danby DBMW1361ABSS handleiding
Handleiding
Je bekijkt pagina 19 van 72
18
OPERATING INSTRUCTIONS
PROTECTIONS
Overheating Protection
When the system enters into
super high temperature protection
status, the digital display shows
“E03” and continues to beep.
After pressing STOP/CANCEL,
the system comes back to normal
standby mode. (Except the
microwave function).
Low Temperature Protection
When the system enters into
super low temperature protection
status, the digital display shows
“E04” and continues to beep.
After pressing STOP/CANCEL,
the system will go back to normal
standby mode. (Except the
microwave function).
Sensor Malfunction Protection
The system enters into protection
mode when the system sensor is
open circuited or short circuited.
The display shows “E05” or “E06”
and the buzzer will make an alarm
sound. After pressing STOP/
CANCEL, the system will go back
to normal standby mode. (Except
the microwave function)
Button Adhesion Protection
In any state, if a button on the
control panel is held down for
60 seconds, the program stops
working immediately. The display
will show “FAIL” on the screen, and
the appliance will beep.
If the button is continually pressed
(held down or stuck down), then
the appliance will beep every
minute.
All buttons will be invalid at this
time.
After troubleshooting, press the
STOP/CANCEL button to return
standby mode.
Bekijk gratis de handleiding van Danby DBMW1361ABSS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Danby |
| Model | DBMW1361ABSS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5302 MB |
