Handleiding
Je bekijkt pagina 44 van 44
OPERATING INSTRUCTIONS
Remember your favorite setting and run into it by press One button
Remember the favorite setting:
1. In each mode (COOLING/ HEATING/ FAN/ DRY),long press
and button over 3 seconds to remember it;
2. When "AU" flashing appears on the remote controller display,
that means the remote controller remember your favorite setting;
* Press any button to quit, and you can reset it by repeat 1, 2 operation.
Run into the favorite setting:
1. In each mode (COOLING/ HEATING/ FAN/ DRY), one press
and button to active;
2. The appliance will run as your favorite setting and you will see
[AU] flashing on the remote controller,
3. Press it again or other buttons to cancel this function.
I SET function(Optional)
Whether the device is powered on or off, briefly press the button
to switch between Fahrenheit and Celsius with a single click, and the
corresponding signal will be sent. Upon successful switching, the
temperature display will blink 2 times.
o
C/
o
F Switching function
8 heating function (Optional)
1.Long press ECO button over 3 seconds to active this function,
and [8 ]([46 ]) will appear on the remote display.
2.This function will auto start the heating mode when the room
temperature is lower than 8 (46 ), and it will return to stand
by if the temperature reaches 9 (48 ).
3. lf the room temperature is higher than 18 (64 ), the appliance
will cancel this function automatically.
G E
N
G E
N
ϰϬ
Bekijk gratis de handleiding van Daizuki DXTH12X626A-21, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daizuki |
| Model | DXTH12X626A-21 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5764 MB |
