Handleiding
Je bekijkt pagina 15 van 49
Page 15
Troubleshooting
SAFETY PRECAUTIONS
If any of the following conditions occurs, turn o your unit immediately!
• The power cord is damaged or abnormally warm.
• You smell a burning odor.
• The unit emits loud or abnormal sounds.
• A power fuse blows or the circuit breaker frequently trips. • Water or other objects fall into or out
of the unit.
DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AN AUTHORIZED SERVICE PROVIDER
IMMEDIATELY!
Common Issues
The following problems are not a malfunction and in most situations will not require repairs.
Possible CausesIssue
Unit does not turn on when
pressing ON/OFF button
Unit does not turn on when
pressing ON/OFF button
The indoor unit
emits white mist
Both the indoor
and outdoor units
emit white mist
Both the indoor
and outdoor units
make noises
The indoor unit makes noises
The Unit has a 3-minute protection feature that prevents the unit from overloading.
The unit cannot be restarted within three minutes of being turned o.
Cooling and Heating Models: If the Operation light and PRE-DEF (Pre-heating/ Defrost)
indicators are lit up, the outdoor temperature is too cold and the unit’s anti-cold wind is
activated in order to defrost the unit.
In Cooling-only Models: If the “Fan Only” indicator is lit up, the outdoor temperature is
too cold and the unit’s anti-freeze protection is activated in order to defrost the unit.
The unit may change its setting to prevent frost from forming on the unit. Once the
temperature increases, the unit will start operating in the previously selected mode again.
The set temperature has been reached, at which point the unit turns o the compressor.
The unit will continue operating when the temperature fluctuates again.
In humid regions, a large temperature dierence between the room’s air and the
conditioned air can cause white mist.
When the unit restarts in HEAT mode after defrosting, white mist may be emitted due
to moisture generated from the defrosting process.
A squeaking sound is heard when the system is OFF or in COOL mode. The noise is also
heard when the drain pump (optional) is in operation.
A squeaking sound may occur after running the unit in HEAT mode due to expansion
and contraction of the unit’s plastic parts.
Low hissing sound during operation: This is normal and is caused by refrigerant gas
flowing through both indoor and outdoor units.
Low hissing sound when the system starts, has just stopped running, or is defrosting:
This noise is normal and is caused by the refrigerant gas stopping or changing direction.
Squeaking sound: Normal expansion and contraction of plastic and metal parts caused
by temperature changes during operation can cause squeaking noises.
Bekijk gratis de handleiding van Daizuki DX1C12426-22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daizuki |
| Model | DX1C12426-22 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6253 MB |
