Handleiding
Je bekijkt pagina 18 van 75
13
Instruction for wire connection:
(1) The wiring methods in g. 4.4, g. 4.5, g. 4.8 and g. 4.9
can be adopted for the wired controller connecting Atlas
unit.
(2) The wiring methods in g. 4.4~g. 4.7 can be adopted for
the wired controller connecting VRF unit.
(3) Only the wiring methods in g. 4.4 and g. 4.5 can be
adopted for the wired controller connecting Big Duct Type
unit or Air-cooled Packaged unit, that is, one (or two)
wired controller(s) can control only one indoor unit, cannot
control multiple indoor units of different systems.
(4) When one (or two) wired controller(s) control(s) multiple
indoor units simultaneously, the wired controller can
connect to any one indoor unit, but the connected indoor
unit must be the same series indoor unit. The total quantity
of indoor unit controlled by wired controller can’t exceed
16 sets, and the connected indoor unit must be within
the same indoor unit’s network. Wire controller must set
quantity of group control indoor units. Please refer to 4.2.3
Parameter Setting “P14”.
(5) When two wired controllers control one (or more) indoor
unit(s), the addresses of those two wired controllers should
be different. Please refer to 4.2.3 Parameter Setting “P13”.
(6) The terminal of the wire controller is non-polarized and
cannot be connected to strong electric.
NOTE: Wired controller ACCD_WC6 only supports one (or more)
indoor unit(s) controlled by one wired controller.
Bekijk gratis de handleiding van Daitsu DS 18KDB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daitsu |
| Model | DS 18KDB |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4119 MB |
