Handleiding
Je bekijkt pagina 52 van 196
REMOTE CONTROL
SELF-CLEAN function (Optional)
1. This function helps carry away the accumulated
dirt, bacteria, etc from the indoor evaporator.
2. This function will run about 30 minutes, and it
will return to the pre-setting mode. You can
press button to cancel this function during
the process.
You will hear 2 beeps when it's finished or
cancelled.
It's normal if there is some noise during this
function process, as plastic materials expand
with heat and contract with cold.
8 heating function (Optional)
o
C
1. Long press ECO button over 3 seconds to active
this function, and ( ) will appear on
the remote display.
Do it again to deactivate this function.
oo
8C 46F
2. This function will auto start the heating mode
o
when the room temperature is lower than 8 C
o
(46 F), and it will return to standby if the
oo
temperature reaches 9 C (48 F).
o
3. If the room temperature is higher than 18 C
o
(64 F), the appliance will cancel this function
automatically.
Indoor unit
Outdoor unit
oo
Temp < 86 F (30 C)
oo o o
41 F (5 C) < Temp < 86 F (30 C)
We suggest operating this function at the
following ambient conditions to avoid certain
safety protection features.
It's suggested to utilize this function every
3 months.
Only optional for some heating pump inverter
appliance.
To active this function, turn off the indoor unit
at first, then press CLEAN button
then you will hear a beep, AC will
appear on the indoor LED, and will
appear on the remote display .
ANTI-MILDEW function (Optional)
Press button to activate the ANTI-MILDEW
function, will appear on the display. Do it again
to deactivate this function. After running COOL/
DRY for more than 30 minutes, you can operate
this function, the unit will blow airflow for about
15 minutes to dry the inner parts to avoid mildew,
then shuts off the unit.
Note: ANTI-MILDEW function only available in
DRY/COOLING mode.
ANTI-
MILDEW
ANTI-
MILDEW
Gentle Wind function (Optional)
1. Turn on the indoor unit, and change to COOL
mode, then press GENTLE WIND button or
long press FAN and MUTE button together
3 seconds to active this function, will
appear on the display.
Do it again to deactivate it.
2. This function will auto close the vertical flaps,
and give you the comfortable gentle wind feeling.
Health function (Optional)
2. When the HEALTH function is initiated, the
Ionizer/ Plasma/ Bipolar Ionizer/ UVC Lights
(depending on models) will be energized and
running.
1. Turn on the indoor unit at first, press HEALTH
to active this function, will appear on the
display.
Do it again to deactivate it.
12
Bekijk gratis de handleiding van Daitsu ARTIC DS 09KTP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daitsu |
| Model | ARTIC DS 09KTP |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 24065 MB |
