Daikin VAM650J8VEB handleiding
Handleiding
Je bekijkt pagina 19 van 32
13 Configuration
Installation and operation manual
19
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664011-1 – 2021.08
NoYes
Field Settings
Save the settings?
SettingReturn
11 After you have completed all changes, press the Cancel button
(a) twice to return to the normal mode.
b
a
Case 2: Change settings with BRC301B61
Make sure that the switch box lid on the heat reclaim ventilation unit
is closed.
1 With the unit in normal mode, press the Inspection/Trial button
(a) for more than 4 seconds to enter the local setting mode.
2 Use the Ventilation mode button (up - b) and the Airflow rate
button (down - b) to select a mode number.
Result: The code display is blinking.
3 To configure settings for individual units under group control,
press the Timer setting on/off button (c) and select the number
of the unit that you want to configure.
4 To select the setting switch number, press the top section of the
Timer button (d). To select the setting position number, press
the lower section of the Timer button (e).
5 Press the Program/Cancel button (f) once to enter the setting.
Result: The code display stops blinking and lights up.
6 Press the Inspection/Trial button (a) to return to normal mode.
c
f
a
d e
b
SETTING
INFORMATION
Setting 18(28)-11 CANNOT be selected with this controller.
Case 3: Change settings with BRC1H
INFORMATION
Please refer to the Installer and user reference guide of the
BRC1H user interface.
Bekijk gratis de handleiding van Daikin VAM650J8VEB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | VAM650J8VEB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4596 MB |
