Daikin RXM50A5V1B handleiding
Handleiding
Je bekijkt pagina 54 van 80
11 | Configuration
Installer reference guide
54
RXA-B8, RXM-A(9), ARXM-A(9), RXP-N9, RXF-D(9), ARXF-A(9), RZAG-B
R32 split series
4P766272-2 – 2024.01
11 Configuration
11.1 Facility setting
Use this function for cooling at low outdoor temperature. This function is designed
for facilities such as equipment of computer rooms. NEVER use in a residence or
office where people occupy the space.
11.1.1 To set the facility mode
When cutting jumper J12 on the PCB, the operation range will expand to –15°C.
The facility mode will stop if the outdoor temperature drops below –20°C and
resume when the temperature rises again.
To cut jumper J12
1 Remove the top plate of the outdoor unit.
2 Remove the front plate.
3 Remove the drip proof cover.
4 Cut jumper J12 on the outdoor unit PCB.
J6J4J9J5J7J8
J12
d
b c
a
a Front plate
b Top plate
c Drip proof cover
d Jumpers
INFORMATION
▪ The indoor unit may produce Intermittent noise due to the outdoor unit fan
turning ON and/or OFF.
▪ Do NOT place humidifiers or other items which might raise humidity in rooms
when you use the facility mode.
▪ Cutting jumper J12 sets the indoor unit fan to the highest speed.
▪ Do NOT use this setting in residences or offices with people.
11.2 Standby electricity saving function
11.2.1 About the standby electricity saving function
This mode turns OFF the power supply of the outdoor unit and sets the indoor unit
into the standby saving mode to reduce the power consumption of the unit.
This mode is only applicable for outdoor units: ARXM50, RXM50+60 and RZAG in
combination with indoor units: FTXM, ATXM, FVXM.
Bekijk gratis de handleiding van Daikin RXM50A5V1B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | RXM50A5V1B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10482 MB |
