Daikin FXFQ25AVEB handleiding
Handleiding
Je bekijkt pagina 13 van 16
Installation and operation manual
10
How to clean the air filter
Clean the air filter when the display shows " " (TIME TO
CLEAN AIR FILTER).
Increase the frequency of cleaning if the unit is installed in a room
where the air is extremely contaminated.
(As a yardstick for yourself, consider cleaning the filter once a half
year.)
If dirt becomes impossible to clean, change the air filter. (Air filter
for exchange is optional.)
1
Open the suction grille (See figure 21) (action 1 in the
illustration).
Push both levers simultaneously in the direction of the arrow
as indicated in the illustration and carefully lower the grille.
(Identical procedure for closing.)
2
Remove the air filter (actions 2 to 4 in the illustration).
Pull the air filter clip on both the bottom left and the right side
of the filter toward you, and detach the filter.
3
Clean the air filter. (See figure 23)
Use vacuum cleaner or wash the air filter with water.
When the air filter is very dirty, use soft brush and neutral
detergent.
4
Remove water and dry in the shade.
5
Install the air filter back in place (perform actions 2 to 4 in the
illustration in reverse order).
Attach the air filter to the suction grille by hanging it over the
projected portion above the suction grille.
Press the bottom of the air filter against the projections on the
bottom of the grille to snap the air filter into its place.
6
Close the suction grille by performing procedure step 1 in
reverse order.
7
After turning on the power, press the FILTER SIGN RESET
button.
The "TIME TO CLEAN AIR FILTER" display vanishes.
How to clean the suction grille
(See figure 21)
1
Open the suction grille (action 1 in the illustration).
Refer to procedure step 1 in "How to clean the air filter" on
page 10.
2
Detach the suction grille (actions 5 to 6 in the illustration).
First detach the 2 strings from the pins of the decoration
panel.
Hold the suction grille open at 45 degrees and lift it upward to
unhook it from the decoration panel.
3
Remove the air filter (actions 2 to 4 in the illustration).
Refer to procedure step 2 in "How to clean the air filter" on
page 10.
4
Clean the suction grille.
Wash with a soft bristle brush and neutral detergent or water,
and dry thoroughly. See figure 24.
5
Install the air filter back in place (perform actions 2 to 4 in the
illustration in reverse order).
6
Reattach the suction grille by performing procedure step 2 in
reverse order (perform actions 5 to 6 in the illustration in
reverse order).
7
Close the suction grille by performing procedure step 1 in
reverse order.
How to clean the air outlet and outside panels
Clean with a soft cloth.
When it is difficult to remove stains, use water or neutral
detergent.
Disposal requirements
Your product and the batteries supplied with the
controller are marked with this symbol. This
symbol means that electrical and electronic
products and batteries shall not be mixed with
unsorted household waste. For batteries, a
chemical symbol can be printed beneath the
symbol. This chemical symbol means that the
battery contains a heavy metal above a certain concentration.
Possible chemical symbols are:
■ Pb: lead (>0.004%)
Do not try to dismantle the system yourself: the dismantling of the
product, treatment of the refrigerant, of oil and of other parts must
be done by a qualified installer in accordance with relevant local
and national legislation. Units and waste batteries must be treated
at a specialized treatment facility for re-use, recycling and
recovery. By ensuring correct disposal, you will help to prevent
potential negative consequences for the environment and human
health. Please contact the installer or local authority for more
information.
NOTE
Do not wash the air filter with hot water of more than
50°C. Doing so may result in discoloration and/or
deformation.
Do not expose the unit to fire. Doing so may result in
burning.
NOTE
Do not remove the air filter except when cleaning.
Unnecessary handling may damage the filter.
NOTE
When the suction grille is very dirty, use a typical
kitchen cleaner and let it sit for about 10 minutes.
Then, wash it with water.
Do not wash the suction grille with hot water of more
than 50°C. Doing so may result in discoloration and/or
deformation.
NOTE
Do not use gasoline, benzene, thinner, polishing
powder, liquid insecticide. It may cause discoloring or
warping.
Do not let the indoor unit get wet. It may cause an
electric shock or a fire.
Do not scrub firmly when washing the blade with water.
The surface sealing may peel off.
Do not use water or air of 50°C or higher for cleaning
air filters and outside panels.
EN3P320142-1F.book Page 10 Tuesday, October 3, 2017 2:46 PM
Bekijk gratis de handleiding van Daikin FXFQ25AVEB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Daikin |
| Model | FXFQ25AVEB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2934 MB |
